How to Open a Frozen Lock | Mr. Locksmith Delta
https://www.mrlocksmithdelta.com/
Mr. Locksmith Delta: (604) 259-7618
How to Open a Frozen Lock Delta: The most common cause of the locks being frozen if people have washed their car so that the whole door’s frozen.
The Polar Vortex is causing below freezing temperatures and winter storms across Canada and the US. Winter storms can bring cold temperatures, power failures and frozen locks.
The easiest, quickest way is you get some windshield lock de-icer or this is windshield and window de-icer. You can make your own. Basically, it is isopropyl alcohol aka rubbing alcohol. Just spray the whole sides of the car door. Spray the lock. Spray the sides. Spray all over. It is not going to hurt the car. Stinky, yes. Be careful it is extremely flammable. Just let it seep into the door cracks, handle and lock. You can change the bottle to it to a stream but get it right in there. Get it on everything, and then you can get the door open. You can make your own lock de-icer, as well as your windshield de-icer. For your lock de-icer just use this rubbing alcohol. This one is 91% isopropyl alcohol. This is great just for raw, lock de-icer. If you want to make some windshield de-icer, it works fantastic. Use two-thirds of the high-quality rubbing alcohol with one-third water. If you’re at home get your hairdryer. Plug it in. There are some 12-volt hair dryers. At home just plug it into an extension cord. Get the hairdryer going. You’re going to blow hot air all down the sides. This is another handy method. If you don’t have the lock de-icer, the windshield de-icer, get a hairdryer. Put an extension cord on it. Just sit there and just heat up the whole door, all the edges, all everything, as well as the lock. This works pretty well. Takes some time, but it works great. So I hope this has been of help to unfreeze your frozen car door or frozen lock you are locked out.
Frozen Do0r Locks? Call Mr. Locksmith Automotive
Frozen Hockey Puck Lock
Hockey Pucks locks are great for protecting your service truck or locksmith vehicle from Break and Enter attempts. However, in the winter the Hockey Pucks locks on your Locksmith Van or service truck ice up and the locks become frozen while driving in the snow or slush. Prevention is the number one so use WD-40 and spray the heck out of it. WD-40 is a penetrating oil, but it is also water displacement fluid. If your Hockey Puck lock t is iced up give it a few hits first with a rubber hammer then take your lock deicer. Eighty percent or more isopropyl alcohol is the best. Take the lock deicer, get it right in the keyhole, spread it all over it, and that should work where our key will now be able to go in and open it up. Prevention’s the best bet. Give the lock and keyway lots of WD-40, and it works really well to prevent the lock from freezing. On my own Mr. Locksmith service truck I don’t mind using a butane lighter blowtorch. Just give the blowtorch a little twist, push and click and you get a nice hot flame. Just heat the hockey puck lock right up. Again, I wouldn’t do this on a customer’s. This is my own locksmith service truck. This will get the all unfrozen. And be careful, the lock can get really, really hot. The other way is to get a lighter, match, etc. to heat the lock or keyway. I have this little propane torch. Just heat your key up it doesn’t take long. Heat it up, and then you can start putting it into the lock. Another method to unfreeze the lock if you have nothing just heat the key with your hand, hold it in your hand, get it all heated up. It takes a long time, but if you have nothing, just use your hand. So again, if you have absolutely nothing, heat it with your hand. Just hold it in your hand, heat it up.
For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website
Mr. Locksmith Delta: (604) 259-7618
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/